Tag Archives: RDM



HS-650 Production Heat Sealer

Used for the production of high-quality heat seals in flexible packaging, this instrument produces seals up to 650mm long x 5 to 25mm wide.

Precise control of heat sealing process variables (temperature, pressure, and dwell time). It enables an optimal balance of material specification, packaging machine speed, and seal integrity. Accuracy and repeatability in laboratory heat seal testing is vital.

The HS-650 Production Heat Sealer provides precision digital controls for this purpose in this special version for seals up to 650mm wide.

HS-650 Production Heat Sealer

This heat sealer has been specifically designed to seal wider packages specifically in the medical device industry. The sealing head can be constructed of stainless steel components to meet the requirements of clean room environments, otherwise normally manufactured from aluminium.

This instrument is based on the standard HSE-3 heat sealing machine and is therefore very similar to operate.
The sealing jaw is guided on each side to ensure smooth and straight movement, the lower jaw being silicone rubber is self-adjusting for alignment.

The tray support allows the product to be placed on the machine and then easily presented to the sealing jaws.

 

With features like:

  • Precise pressure calibration of standard surface area jaw face
  • Temperature, pressure and dwell time digital controllers
  • Jaws constructed in aluminum and silicon with precision ground faces
  • Range of jaw face surfaces including Matched Crimp and Teflon Coating
  • Auto cycle feature for greater user convenience with multiple samples

 

Model: SE Series

The ATOM Swing Arm Clicker Presses are used for a wide variety of die cutting applications. The most common uses are cutting soft to semi-rigid materials such as gaskets, leather, cork, rubber, elastic, foam, and other like materials. All of ATOM’s presses are completely hydraulic and are made of strong casting material to ensure powerful yet quiet running. ATOM’s casting also ensures maximum beam strength and performance. All moving parts are made of hardened steel and are self-lubricating. There are many models available ranging from 8-25 tons witClicker Pressesh bed sizes up to 20″x40″ and cutting heads up to 24″ in width.

The ATOM Clicker Press is the ideal solution for die cutting sheets of material with small cutting dies. To guarantee maximum visibility of the material, the swing beam can be easily moved left-right by the operator in order to collect the die cut pieces and re-position the tool for the next cut. The ATOM Clicker Presses are quite simple to operate; simply place the sheet of material onto the cutting pad attached to the base of press, position the tool, cycle the two-hand push-button controls (3/10 second delay for optimal safety) and the beam descends under hydraulic pressure, cuts the shape, and returns to the desired height setting.

HSM-4 Laboratory Heat Sealer

The HSM-4 Laboratory Heat Sealer was developed to precisely control the parameters essential in determining the heat seal threshold.
Especially suited for flexible packaging materials, laminates, foils, and paper. The HSM-4 features accurate control of temperature, pressure and dwell time of a standard surface area sealing jaw.

This Heat Sealer is used for precise control of heat sealing process variables (temperature, pressure, and dwell time), enables an optimal balance of material specification, packaging machine speed, and seal integrity. Accuracy and repeatability in laboratory heat seal testing is vital, and the HSM-4 provides a standard range of controls for this purpose.

With features like:

  • Pressure calibration of standard surface area jaw face
  • Temperature digital controller, pressure and dwell time dial controllersHSM-4 Laboratory Heat Sealer
  • Jaws constructed in aluminum and silicon with precision ground faces
  • Range of jaw face surfaces including Matched Crimp and Teflon Coating

 

HL-1 Low Pressure Laboratory Heat Sealer

The satisfactory development, manufacture, conversion, and application of flexible packaging films necessitates the implementation of precise methods of quality control systems.
The HL-1 has been developed to precisely control the parameters essential in determining the heat seal threshold of low-pressure heat sealing material for applications where low-pressure sealing is required, often associated with the product being packaged such as the Tobacco or chocolate confectionery Industries.

The HL-1 has a floating top jaw which has a given seal area and weighs the exact amount to produce the correct pressure needed according to the force per unit area calculation. The seal alignment is easily achieved because of the floating top jaw.

Especially suited for flexible packaging materials used in the Tobacco or Confectionery industry, the HL-1 features accurate control of temperature, pressure and dwell time of a standard surface area sealing jaw.