LEGEND O2/CO2

O2/CO2 Gas Analyser: Suitable for Modified Atmosphere Packaging (MAP)

The LEGEND O2/CO2 is a portable, reliable and durable gas analyser. This measurement device is ideal for starting small modified atmosphere packaging (MAP) productions or other inerting. The last measure on the screen will stay there until the next cycle is started.

Product advantages

  • Performance/Quality/Cost
  • Reliability/Durability/Simplicity
  • Low sampling volume
  • Runs off batteries (or from a power supply)

Expert advice

  • Air adjustment of the LEGEND O2/CO2 requires the full attention and skill of a supervisor, given the various environmental variables.
  • In the interest of protecting your device, we would advise you to regularly replace the filters in order to avoid the product flowing back into the device.
  • Safety: For user protection, we would recommend using the sheath supplied with the needle.
Affected packaging types:

                         

Ingress protection of enclosureIP 41
Measurement devicePortable
EnclosureAluminium/ABS
Weight750 g
Width125 mm
Height50 mm
Depth180 mm
BatteryNiMH Battery. Battery autonomous up to 16h (or 6,000 measurements) when used continuously and intensively.100% charge in 4h
Power100-240VAC power supply via external charger – 50/60Hz
Display2 lines of 8 characters LCD
Storage conditions0 – 70°C / 0 – 90% HR
Terms of use0 – 40°C / 10 – 90% HR
O2 Oxygen measurementTechnology : Electrochemical sensor
T90 response time : <5s
Accuracy : +/- 1% relative
Lifetime : <2 years at air NTPResolution : +/-0,1%
CO2 Carbon Dioxide measurementTechnology : NDIR
Accuracy : +/- 2% full scale
Resolution : 0,1%
T90 response time : 7s
SamplingPumping flow : 12l/h
Sample volumes : 6ml
  • Needle cleaning tool
  • Set of 10×100 septums gas
  • Set of 5×100 septums gas
  • Box of 10 needles 0,5×16 mm
  • Box of 10 needles 0,6×25 mm
  • Box of 12 stainless steel needles 0,8×15 mm
  • Box of 10 needles 0,8×40 mm
  • Box of 12 stainless steel needles 1,5×25 mm
  • Box of 12 stainless steel needles 1×25 mm
  • Hydrophobic filter for needles 0,45 μm x 25 mm 0,2 μm x 15 mm
  • Hydrophobic filter for needles 0,45 μm x 25 mm
  • Sample tube 1,6 mm x 3,2 mm x 50 cm
  • Sampling kit for gas analysis
  • Carry case for Legend and Mercury
  • Bottle 100% N2 – 110 liters
  • Bottle 2%O2 in N2 – 110 liters
  • Bottle 5%O2 in N2 – 110 liters
  • Bottle 17% O2 in N2 – 110 liters
  • Bottle Air – 20,94 O2 – 110 liters
  • Bottle 100% CO2 – 55 liters
  • Bottle 50% CO2 in N2 – 110 liters
  • Bottle 30% CO2 in N2 – 110 liters
  • Pressure regulator tap with 110 and 34 liters bottle gauge.
  • Bottle 2% O2 – 34 liters – purity 4.0
  • Calibration certificate
  • A carry case : 390x295x102 mm
  • 1 Sampling kit
  • 5 Needles
  • 2 Filters
  • 100 Septums
  • Power supply
  • User manual